If the same drain keeps clogging no matter how many times it’s cleared, the problem usually isn’t the clog itself. It’s the grease, scale and roots lining the inside of your pipes. Hydro jetting uses high-pressure water to scour that buildup away and restore your drain and sewer lines to full flow.
Trademark’s licensed plumbers provide hydro jetting across Hayden, Coeur d’Alene, Post Falls and the Spokane area. We check your pipes first, use the right pressure for your plumbing, and give you upfront pricing before any work begins. With 24/7 service, a real person answers your call day or night.
Tired of clearing the same clog again and again? Call 208-962-1522 or schedule hydro jetting service and get your drains flowing freely.
What Is Hydro Jetting?
Hydro jetting sends a stream of high-pressure water through a specialized hose and nozzle into your drain or sewer line. The nozzle sprays forward to break through blockages and backward to scrub the pipe walls clean as it moves through the line.
Hydro jetting is a good fit for:
- Recurring clogs in kitchen, laundry or main drain lines.
- Grease buildup from kitchen drains.
- Tree roots that have worked into the sewer line.
- Scale and mineral deposits that narrow the inside of the pipe.
- Sludge and debris in the main sewer line.
- Preventive maintenance for homes with a history of backups.
For a simple, one-time clog in a single fixture, standard drain cleaning is often all you need.
Signs Your Drains May Need Hydro Jetting
Buildup inside your pipes usually gives warning signs before it causes a full backup. Hydro jetting may be the right next step if you notice:
- The same drain clogs again within weeks or months of being cleared.
- Several drains in the house are slow at the same time.
- Gurgling sounds from sinks, tubs or toilets.
- Sewer or musty odors coming from drains.
- Water backing up into a floor drain, shower or tub when you run the washer or flush a toilet.
In North Idaho homes, tree roots and grease are two of the most common reasons these problems keep coming back, and both respond well to a thorough jetting.
Hydro Jetting vs. Drain Snaking
Both methods clear clogs, but they work differently. A drain snake (or auger) is a rotating cable that punches a hole through a blockage. Hydro jetting cleans the full inside of the pipe.
| Hydro Jetting | Drain Snaking | |
|---|---|---|
| How it works | High-pressure water scours the pipe walls | Rotating cable breaks through the clog |
| What it removes | Grease, scale, sludge, roots and debris along the whole pipe | The blockage itself, leaving buildup on the walls |
| Best for | Recurring clogs, grease, roots, main sewer lines | Simple, one-time clogs in a single fixture |
| Results | Restores pipe to near full flow | Clears a path for water to drain |
| Repeat clogs | Less likely, since buildup is removed | More likely if buildup remains |
Think of snaking as opening a path through the clog, and hydro jetting as cleaning the whole pipe. If you’ve had a drain snaked more than once and the clog keeps coming back, hydro jetting is often the better long-term fix.
Is Hydro Jetting Safe for Older Pipes?
Hydro jetting is safe for most residential plumbing when it’s done by a trained professional with the right pressure and nozzle. Older pipes need extra care, though. Clay, cast iron and Orangeburg pipe may already have cracks, heavy corrosion or weak sections that high pressure could make worse.
That’s why it pays to look before jetting. A sewer camera inspection shows the condition of your line, so your plumber can:
- Confirm the pipe is sound enough for jetting.
- Adjust the water pressure and nozzle to match your pipe material.
- Recommend a gentler cleaning method if the line is fragile.
- Spot damage that needs sewer line repair instead of cleaning.
If your pipes aren’t a good candidate for hydro jetting, we’ll tell you and explain the safer options.
